How do I reset the Setek WiFi extender? - (Step by step instructions!) (2023)

Want to know how to reset Setek WiFi Extender? The process is not that simple...

You need to enable Setek resetrenewaland then access the router's control panel to complete the process.

If you've never done anything like this before, make sure you have a Windows computer + Internet available to reset the Setek extender in an instant.

Factory reset on the Setek Extender is performed from the control panel of the network device (router/modem) after pressing the reset button. To access the control panel, login with standard administrator credentials.

Next, let's find out whether a hard reset of the Setek extender is possible or not!

Can a Setek WiFi Extender be reset?

In general, a factory reset of your Setek WiFi Extender is usually done when the device is not working properly.

A reset is always possible when the extender starts to cause too many network dead zones in your home, and a reset can work well to resolve these issues.

O Extensor WiFi Setek can be reset!

What the reset actually does is update the device software. This will restart all extender services and fix any network related issues on the device.

Will the reset harm your device? Definitely not!

To use:Reset is a superior solution when your device has Wi-Fi or network related issues.

Now let's learn how to reset your WiFi extender:

(Video) Setek Wifi Extender Setup | Wi-fi Setup

How to reset Setek WiFi Extender to factory settings?

How do I reset the Setek WiFi extender? - (Step by step instructions!) (1)

To factory reset your Setek WiFi extender, we will use the help of the following steps.

We made sure to include all possible outcomes and possible issues so you can go through the reset process without any hiccups.

Let's go in right now!

Step #1 Plug in your router and extender

Before we get to the essential reset process, there are some preparatory steps you need to take.

The first step, as the name suggests, is to plug in your router and the WiFi extender you want to reset to factory settings.

Both devices must be connected to alight socket.

It is recommended that both the router and extenders be plugged into separate outlets and that you avoid using an electrical splitter.

Two outlets should be good enough for the reset process as this process requires a stable power supply especially for your Setek WiFi Extender.

To use:The LED lights on both devices should light up as soon as you connect them to the power supply!

Step 2 Place the router near the extender

How do I reset the Setek WiFi extender? - (Step by step instructions!) (2)

A final preparation factor is to move the router closer to the WiFi extender and wait for the Setek device to connect to the router. Only then should you proceed with a factory reset.

Just put the router5-10 metrosaway from the WiFi extender and wait until the LED on the Setek device turns green.

Green color means that the extender has successfully connected to the router and you can now complete the factory reset process.

(Video) SETEK Wifi Long Range Signal Booster UPTO 2500 sqare ft

To use:The router also identifies the connection once the extender is paired with the device.

Step #3 Locate the reset button

The rest of your Setek WiFi Extender is just a push of the buttonphysical reset buttonand enable reboot in router settings.

Of course, your first task is to press the physical reset button to initiate the reset sequence on the extender.

  • There is a reset button on the bottom of your Setek WiFi Extender!
How do I reset the Setek WiFi extender? - (Step by step instructions!) (3)

Take a quick look at the device and you might just find the button you need to use.

This button does not fully reset the extender, but it does put it in a state where it can trigger a soft reset.

Once you find the button, move on to the next step to initiate the hard reset.

Addendum:If you are having trouble finding the reset button, disconnect your device and look for the button.

Step #4 Press the reset button

Then press the reset button on your Setek WiFi extender.

The button must be pressed for a specific amount of time and the LED must change to a specific color to indicate the reset status of the extender. Let's learn how!

Follow these instructions to successfully activate the reset state of your Setek extender:

  1. hold theRestablecer Knopfon your extender.
  2. Keep holding the button to10 seconds.
  3. Release the button after that time.
  4. Wait until the WiFi extender LED lights upRed color.
  5. wait for another30 secondswhile the LED on your Setek extender is red.
To use:The extender's LED light will eventually turn off, but that doesn't mean the reset failed.

Step #5 Get the Router's Default Gateway

The next step is to purchase the routerdefault gateway IP.

When the extender is connected to the router, the factory reset option can be accessed through the router settings.

How do I reset the Setek WiFi extender? - (Step by step instructions!) (4)

However, to access these options and settings, you need the above address!

(Video) Unboxing and Setup Setek Wifi Extender

To purchase your network's default gateway in simple steps:

  1. Get a computer or laptop connected to the router's WiFi.
  2. open thismenu do windows.
  3. Scribe"CMD' and press the buttonenter key.
  4. wait for themsystem symbolOpen.
  5. When the window appears, type "ipconfig" and pressureLog in.
  6. Scroll down and look for "default network gateway“.
  7. Copy the IP address next to the Default Gateway label.
  8. Exit the command prompt.

Read on to find out how to access your router's settings!

To use:Inside the CMD, copy the default gateway after highlighting it and pressing Enter.

Step #6 Access the router settings

now that you have themdefault gateway addressThe next step is to access the router settings.

In the router control panel you will find a setting for your Setek extender and from there you can activate a factory reset.

Here's how to access your router's settings in simple steps:

  1. open thisBrowseron your desktop or laptop.
  2. cole odefault gatewayin the browser's search field.
  3. beat thoseenter key.
  4. Wait until you are taken to your router's login screen.
  5. use it"Administrator' for username and password.
  6. Tighten "begin session' to access your router settings.
To use:If "admin" doesn't work for the password field, try "password".

Step #7 Go to the admin tab

The last thing you need to do before you can reset your Setek extender is go to the Management tab in your router settings.

There you have access to the Setek device configuration and therefore you can reset the device.

To access the admin tab, just click on the “ADMINISTRATIONlocated on the right side of the computer screen in the router settings.

There you will be able to initiate factory reset on your Setek WLAN Extender in the last step!

To use:If your router settings are different, the Administration tab might be Access Settings.

Step 8 Factory reset the extender

How do I reset the Setek WiFi extender? - (Step by step instructions!) (5)

When in the Management tab, the Setek WiFi Extender will detect that the hard reset button has been pressed and will ask you whether you want to restart your device or not.

In this message, you need to enter the "Confirm' to proceed with the factory reset.

(Video) Review of Setek Super Boost Wifi Extender

After confirming the message, if there are any further steps related to this reset then follow them to complete the process. You will be notified when the extender has rebooted and is ready to use!

Alarm:Do not exit the router settings while the reset is still in progress as this may stop the process midway.

Brief summary:

Therefore, to reset a Setek WiFi Extender, you must press the reset button on the device's control panel and access the router/modem's control panel to complete the process. You can access the network device control panel using the IP address of the default gateway.

Keep reading:WiFi router not working after reset? - Firmly!


Here we learn everything about how to reset Setek WiFi Extender in a few easy to follow steps that cover absolutely everything.

We hope that this post was helpful and that you were able to successfully reset your Setek WiFi Extender. Lots of luck!

Check out our blog for more relevant guides like this one!

How do I reset the Setek WiFi extender? - (Step by step instructions!) (6)

kevin madera

(Video) The Guide - How to Fix the Password Issue. If the system says «Your password is incorrect» SE-02

Kevin has over five years of experience in various technology startups and providing technology solutions. He has contributed to many technical publications and websites.


How do I reset my Setek extender? ›

Press the WPS button for 10 seconds to restore factory setting. After restore successfully, the WiFi SSID will be "SETEK" after restore successfully, then reset the WiFi extender from the first step.

How do you reset a WiFi extender to factory settings? ›

Locate your extender's Reset or Factory Reset button. The button is usually located on the extender's side or bottom panel behind a small hole. Use a straightened paper clip or similarly sized object to press and hold the Reset or Factory Reset button until the Power LED blinks. This can take up to 10 seconds.

How do I fix my WiFi extender not working? ›

If your Wi-Fi extender cannot connect to the Wi-Fi router, then you need to reset your extender. The location of the reset button in the extender may vary depending on the brand. The reset button will present at the back of your extender, and press it for 10 seconds using a needle.

How do I manually set up a WiFi extender? ›

To set up your extender:
  1. Plug in your extender. ...
  2. Connect your computer or mobile device to the extender's WiFi network. ...
  3. Launch a web browser and enter or ...
  4. Click or tap NEW EXTENDER SETUP. ...
  5. Choose your extender's admin credentials.

How do I reconnect my WiFi extender to a new Wi-Fi? ›

To reset and connect a Wi-Fi Extender to a new router, unplug the Wi-Fi Extender from the wall. Turn off the existing router and plug set the new router up. Plug the Wi-Fi extender back into the wall and press the WPS button on the Wi-Fi extender and the router.

How do I setup a WiFi extender without a WPS button? ›

Locate the Ethernet cable running from your router to your PC, and unplug the end connected to your PC. Then, plug it directly into the range extender. This will establish an Ethernet connection from the range extender to the PC. Step 1A: You can also set up the range extender via a wireless connection.

How do I know if my WiFi extender is broken? ›

The internet speed is slow when connected: If your extender is a lot older than your router, there's a good chance that it doesn't support the latest Wi-Fi technology, and connections will be slower. If your connection speed suddenly gets slower one day, there may be a problem with the extender itself.

Why does my WiFi extender have no internet? ›

As a first step, restart your networking equipment and device and see if that fixes the problem. As with the router, network, wifi and software problems often get fixed automatically with a simple restart. If it doesn't help you, check with the following: Check Modem Lights.

Why is my WiFi extender network not showing up? ›

This can occur if the extender's firmware is corrupt or extender is not getting sufficient power supply. Make sure the extender is connected to the power source properly. Reset the extender by inserting a pin or a paper clip to the Reset hole for about 20 seconds.

What happens when I press the WPS button on my router? ›

The WPS button simplifies the connection process

Press the WPS button on your router to turn on the discovery of new devices. Then, go to your device and select the network you want to connect to. The device is automatically connected to the wireless network without having to enter the network password.

Can you connect Wi-Fi extender directly to router? ›

You need to connect Wi-Fi extender to your router so that you can extend the wireless network. You can place the Wi-Fi extender where the signals get weak so that it can extend the coverage area easily. Therefore, a Wi-Fi extender must be placed in between the router and the standalone devices like your smartphones.

Does a Wi-Fi extender need to be connected to router? ›

Every WiFi extender will need to be connected and in range of a WiFi router to access the internet.

How do I find my Wi-Fi extender password? ›

To find your Extender's Wi-Fi network password:

Log in using your Username and Password. Click Settings then Wireless. Under General, look for WiFi Password. If it says Same as existing network password, it is using the same WiFi password as your main WiFi router.

What is my Wi-Fi extender IP address? ›

Android: http://<extender's IP address> For more information, visit Note: To find your extender's IP address, log in to your router and look for a list of devices connected to your router. The extender's IP address displays in the list.

What does WPS mean on a Wi-Fi extender? ›

Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier.

How do I use WPS without WPS button? ›

Some devices without a WPS button but with WPS support will generate a client PIN. You can then enter this PIN in your router's wireless configuration panels, and the router will use it to add that device to the network.

Can you connect a Wi-Fi extender without an Ethernet cable? ›

You can set up Wi-Fi extenders with an Ethernet cable or wirelessly. While a wired setup is reliable every time, there's no doubt that a wireless Wi-Fi extender is more convenient. But keep reading to see if wireless or wired is the best option for you.

Can you leave wifi extender plugged in all the time? ›

It is completely up to your decision will you leave your Wi-Fi range extender turned on, or switch it off when it is not in use. Regarding power consumption it is very small, almost negligible, e.g. my TP-Link TL-WA850RE power consumption is 3 W (504 Wh weekly, or 26,28 kWh yearly).

How far should a wifi extender be from the router? ›

Wifi extenders still need to be within a reasonable distance from a wifi router, about 20 feet max, in order for them to work effectively. For homes that are 1500 square feet or under a wifi extender can be a good solution to extend your wifi range.

How do I know if my network Extender is connected? ›

You can confirm you are connected to the Network Extender by dialing #48. After registering with the Network Extender you can place and receive calls up to 40 feet away from the Network Extender.

What do I do if my WiFi is connected but no Internet access? ›

Are You Connected to WiFi, But Have No Internet Connection? Here's What To Do.
  1. Step One: Confirm Whether Your Internet Provider Is Down. ...
  2. Step Two: Do a Reboot on Your Modem and/or Router. ...
  3. Step Three: Check Your Router Settings To Ensure Your Permissions are Correct. ...
  4. Step Four: It's Time for a Network Reset.
May 20, 2022

How does a wifi extender receive signal? ›

The range extender connects wirelessly to the router or access point, picks up the signal and retransmits it. Transmission speed for clients connecting through a range extender is not usually equivalent to direct service from the base station, and there is an increase in latency for each hop.

How do I know if WPS is on or off? ›

Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device.

How long do you hold the WPS button? ›

Note: You will need to press and hold the WPS button on the wireless router for about 2-3 seconds. After a short period of time, your device and the wireless router will be connected.

What does WPS mode do? ›

Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network. This information is provided to help connect your TV, Blu-ray Disc™ player, or other supported home video products to a wireless network using WPS.

How do I connect my Wi-Fi extender to my router with wire? ›

Ethernet extenders are typically plug-and-play devices, so they're easy to set up.
  1. Connect the Ethernet cable that came with your extender to an Ethernet port on your router or connection hub. ...
  2. Plug the other end of the Ethernet cable into the Ethernet port on the extender.
  3. Connect the extender to a power source.

Can you connect a Wi-Fi extender to a router without a WPS button? ›

Note: the WPS button on your extender is only used to connect to the router and can't be used to connect devices. If you don't have a WPS button on your hub/router, you can set up your extender using the web based set-up with an internet browser.

Can any Wi-Fi extender work with any router? ›

Most extenders should be able to work with any router—you just want to make sure the extender supports 802.11n if you have an 802.11n router. If you have an older b/g router, an 802.11n extender should work also, but may not work as well.

What do I do if I forgot my WiFi extender password? ›

To find your Extender's Wi-Fi network password:

In the address bar, type Log in using your Username and Password. Click Settings then Wireless. Under General, look for WiFi Password.

Do WIFI extenders need to be reset? ›

You need to reset the Wi-Fi extender regularly: If your extender stops working and has to be reset a lot, that's an indicator that something is wrong.

How do I reconfigure my range extender with a new password? ›

Changing the Extended Wireless Settings of your range extender
  1. Open a browser to log in to the web-based setup page of your range extender. ...
  2. You will then be prompted for a password. ...
  3. Click Basic Settings.
  4. Enter your preferred wireless name and password in the Network Name (SSID) and Password fields.

What is the default password for WiFi extender? ›

Note: The default username is admin and the default password is password. The username and password are case sensitive. Click LOG IN. Follow the prompts to reconnect your extender to your home network.

Should WPS be on or off? ›

On most wireless routers, WPS is enabled by default. The intent is to make it easy for users to set up their network and add all their devices to their Wi-Fi. Therefore, after you set up your network and add the devices you want on your Wi-Fi, if security is a concern, it is a good idea to disable WPS on your router.

What does resetting WPS do? ›

That's just a manual reset button. It will cause the router to reset and redownload the settings.


1. Setek repeater setup guide (SE-02)
(Support Setek)
2. UNBOXING & REVIEW - SETEK WiFi Extender -
3. WEBJD WiFi Extender Instruction
4. SETEK Wireless Signal Booster Amazon
(SeTek Wifi Extender Amazon)
5. ExtendTecc WiFi Setup 😉 IN-DEPTH guide to setup your WiFi extender/repeater
6. SETEK Superboost WiFi Extender Review August 2020
Top Articles
Latest Posts
Article information

Author: Lidia Grady

Last Updated: 03/25/2023

Views: 6337

Rating: 4.4 / 5 (65 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Lidia Grady

Birthday: 1992-01-22

Address: Suite 493 356 Dale Fall, New Wanda, RI 52485

Phone: +29914464387516

Job: Customer Engineer

Hobby: Cryptography, Writing, Dowsing, Stand-up comedy, Calligraphy, Web surfing, Ghost hunting

Introduction: My name is Lidia Grady, I am a thankful, fine, glamorous, lucky, lively, pleasant, shiny person who loves writing and wants to share my knowledge and understanding with you.